oldoaktree
Member
- Location
- County Durham
I’ve one tractor only .
My case cvx 165 (09) is on my log processor it’s needs to run at 480 rpm at the most , this is 910rpm in the tractor which is the required rpm using 1000 rpm pto speed .
Now the engine is set with the hand throttle at 910 but it has a habit of speeding up and slowing down on its own.
I’ve set the engine speed with the button on the control panel but it knocks it off on it’s own and then it speeds up and slows down once again.
The injectors were serviced not long ago and using the tractor at higher revs is no problem.
Any ideas what’s causing this .
My case cvx 165 (09) is on my log processor it’s needs to run at 480 rpm at the most , this is 910rpm in the tractor which is the required rpm using 1000 rpm pto speed .
Now the engine is set with the hand throttle at 910 but it has a habit of speeding up and slowing down on its own.
I’ve set the engine speed with the button on the control panel but it knocks it off on it’s own and then it speeds up and slows down once again.
The injectors were serviced not long ago and using the tractor at higher revs is no problem.
Any ideas what’s causing this .
