Hello everyone, I have a problem with the hydraulics in Maxxum 5140,1994,syncron (without powershift), the hydraulic pump was blowing 25l/min and 125 bar. The lift had no power, but it came to life when I changed the direction of travel, front or rear. The flow compensator spool was blocked, so I cleaned and thoroughly washed the compensator section, now the hydraulic pressure increases and the flow meter shows 185 bar and 55 l/min, but only when I close the direction of travel, no matter whether forward or rear. Does anyone have any ideas as to what effect switching on the direction of travel has on the efficiency and pressure in the hydraulic system in this tractor. I will appreciate any suggestion or lead.
Case maxxum 5140 hydraulic problem !!!
- Thread starter Raff
- Start date
- Tags
- maxxum powershift
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk