- Location
- Lincolnshire
The auto bed height control system bounces the bed up and down instead of settling on the preset height.
Any ideas what’s going wrong?
Manual control and auto pressure control works fine.
There’s a sensor under the front of the operator platform which I pulled right out and attached it to the chain and spring with the bed on the floor as per manual.
Sensor failure?
Bed joints need oiling?
Thanks.
Any ideas what’s going wrong?
Manual control and auto pressure control works fine.
There’s a sensor under the front of the operator platform which I pulled right out and attached it to the chain and spring with the bed on the floor as per manual.
Sensor failure?
Bed joints need oiling?
Thanks.
