- Location
- Pinnaroo. South Australia
I have the above machine. The hydraulic tank low level light and buzzer won’t go off. It does my head in. Any idea why and how can I bypass it.
Need it gone
Need it gone
Have you cleaned the sensor in the tank normally just metal stuck on magnet
I haven’t but this might make sense as I have just had to replace the hydro pump.
Ohhh then i suspect the fun will have just begun...
Protocol for this repair would be ;If you say this much you may as well elaborate
Failure was the charge pump within the hydro unit. Not finding metal in the system but still looking for it.
460 will be fine hydros never went that bad. You can get a additional filter for them that goes in cooling circuit just to be on safe side
Will be fine if it was a 600 I would worry but the 460 was a common failure of charge pump never put much metal into system