Claas liner 2800

[James]

Been meaning to post this for a while.
When opening the rake from transport to working sometimes the 2 rotors don't descend evenly. Doesn't seem to matter whether the oil is cold or hot either

 

[stone age farmer]

does it have manual select on the the individual rotor lift, sometimes times if this is fitted, if the handle is slightly out you will notice on the the unfold but not really when lifting in and out in work position,

 

[James]

does it have manual select on the the individual rotor lift, sometimes times if this is fitted, if the handle is slightly out you will notice on the the unfold but not really when lifting in and out in work position,

Yes it does. Could be that I guess as there's a bit of play in the handle now so could be slightly off centre without really noticing

 

[stone age farmer]

I would say so, I haven't experienced any and my one has done lots, and lots and lots, to be fair I do not use it that much, i have always meant to connect it to 2 spools but over many years of operating it I have found ways to work around, there may an o ring/seal inside damaged, the news one s have control boxes for this feature but at this size of rake seems a lot of money for a electric oil switch,