Claas sieve module

[Zebbedee]

Looking for a sieve adjustment module for a lexion 580 just on the of chance someone has one on the shelf?

 

[v8willy]

Is that the thing like a ram? One failed on ours a few years back, rang the dealer & thay had never sold one before & it would be a complete fortune.

So before ordering we swapped it with the one that works the swath deflector that we never used & has worked away ever since.

 

[Zebbedee]

Is that the thing like a ram? One failed on ours a few years back, rang the dealer & thay had never sold one before & it would be a complete fortune.

So before ordering we swapped it with the one that works the swath deflector that we never used & has worked away ever since.

No it’s like an ecu on lh side of Combine at rear above rear wheel area there are two modules there

 

[Combine Rescue]

What happen with your? If faulty or is missing?

 

[Sandy]

@Chae1 did your 570 not have this problem

 

[Chae1]

@Chae1 did your 570 not have this problem

Had a ECU fail. Don't think it was sieve module. Was one in door next to grain tank.

 

[Sandy]

Looking for a sieve adjustment module for a lexion 580 just on the of chance someone has one on the shelf?

Try JMT Combines

 

[Zebbedee]

What happen with your? If faulty or is missing?

Module is faulty

 

[David.]

£800 will sort it.
As above, ring JMT.

 

[cquick]

Had a similar problem on my 630. Apparently it's the same module on all models since the 500 series, dealer said around £500 for a new one. Ended up cutting the back out of the module, pulled the board out and picked away all the silicone. A small diode came off with the silicone, so I re-soldered it and that fixed the problem! Must've been a dodgy joint. Might be worth a try if you have a soldering iron and half a day. Not much to lose by taking apart the broken one.

 

[Combine Rescue]

Or sent to me for repair.

 

[e3120]

Or sent to me for repair.

Do you operate on a 'no win no fee' basis?

 

[Combine Rescue]

Fair Play and respect rules apply.
I do what I can do
No win no charge- not like brezelec in France.
If you will get an item back unrepaird or I failed then you cover delivery.

I can go out to machine if reasonable distance.

 

[robs1]

Fair Play and respect rules apply.
I do what I can do
No win no charge- not like brezelec in France.
If you will get an item back unrepaird or I failed then you cover delivery.

I can go out to machine if reasonable distance.

Do you do all makes ?

 

[Zebbedee]

£800 will sort it.
As above, ring JMT.

Yea a new one is around £600 but may try JMT or manners or Combine Rescue on here

 

[Chae1]

Try speaking to J. Horsely electronics too, they repaired cebis screen from our combine and specialise in claas electronics.

 

[Combine Rescue]

I do any brands.. And not combines only..
Always ask.
You can ask Mark or Ian from JMT or ask them about me

 

[Header]

Fair Play and respect rules apply.
I do what I can do
No win no charge- not like brezelec in France.
If you will get an item back unrepaird or I failed then you cover delivery.

I can go out to machine if reasonable distance.

I sent you a message