Class 2700 rake

[organicguy]

Our rake hit a telegraph pole last year! Replaced the bent arms but one does not clear the ground properly so assuming we have something a little bent inside.
Any tips on splitting the rotor?

TIA
OG

 

[agri knives]

Our rake hit a telegraph pole last year! Replaced the bent arms but one does not clear the ground properly so assuming we have something a little bent inside.
Any tips on splitting the rotor?

TIA
OG

Which rake is it.

 

[davidroberts30]

if its the tube next to the rotor bent just warm it up and push it back to where it needs to be

 

[organicguy]

Its not the tube, the arms moves around and lifts parallel to the others but at its lowest point it can be rotate 4in out of work, letting grass escape.
Its a 2700 twin rotor.

 

[johnboy87]

Sounds like the cam track bearing is gone or the rollpin for the cam follower. Not sure about class but on krone takes you can undo a couple bolts and pull individual arms out

 

[v8willy]

This will give you a start, been there.....twice...

Today at work

Went a look of my reseed last night. First pic doesn’t show it but there was a faint green tinge. 2nd pic shows grass popping through. Seed has been in the ground 8 days.

thefarmingforum.co.uk