Tha Ulsterscot
Member
- Location
- Greyabbey Co. Down.
Trying to sort out a problem and need a bit of help. When I pressurise the back door of the baler, she does not hold the pressure on the door. The pressure gauge drops almost to zero. This happened towards the end of baling last year, but if you kept pressing the valve lever, as you made the first bale, it eventually locked and worked normally. I've checked the rams which seem OK, and took the spring out of the check valve on the side of the baler, again this seems to be OK. Anyone experience this problem before ,and how was it sorted? Thanks . Tha Ulsterscot.