Happy hillbily
Member
- Location
- Uwchaled, North Wales
The 6640 turbo mowing with a 9ft Kuhn Moco
What is the old one? Couldn’t blow up the pic enough to read the number !Managed to snap an arm last night,
View attachment 898218
had to drag the old girl out of the shed to do the last 3acres. I tell you 3 acres was more than enough !
View attachment 898219
What do you think of the Kuhn? I ruled out an 8ft one for our Case 844 because I thought it would be too heavy but if you've got a 9ft on a 6640 it would probably be okThe 6640 turbo mowing with a 9ft Kuhn Moco
1986 7610What is the old one? Couldn’t blow up the pic enough to read the number !
Used to have a 9ft krone on an 844 no botherWhat do you think of the Kuhn? I ruled out an 8ft one for our Case 844 because I thought it would be too heavy but if you've got a 9ft on a 6640 it would probably be ok
Mounted? We had a 9ft Taarup mounted on the 844 a few times but it was safer on the 5140 and even it was on 3 wheels at times.Used to have a 9ft krone on an 844 no bother
What do you think of the Kuhn? I ruled out an 8ft one for our Case 844 because I thought it would be too heavy but if you've got a 9ft on a 6640 it would probably be ok
The Kuhn is long in transport. Taarups were shorter but they stuck out the side a bit which wasn't ideal. Your 66 stable enough when mowing?Yes I like it, did a nice job of cutting behind the 6640.
It is a heavy brute, nearly 1100kg but has steel conditioner tines. The 6640 is getting an assister ram for the 3 point linkage as it's on its limit without one in transport mode. Needs a lot of weight on the front, the 66 has about half a ton hanging off the front linkage, the 7610 has only the snowplough frame and seven or so weights on the front, and the front end was in the air going to the field.
I did want to put it on the Tw15 but I need to cut off these lobster claws and put it back to original ends before I can do that .View attachment 898630
The Kuhn is long in transport. Taarups were shorter but they stuck out the side a bit which wasn't ideal. Your 66 stable enough when mowing?
i could do with one of those to join our 661o, 631o and 781o
Great line up @Martyn. I would like a 7810 to go with the 6410 and 6910.i could do with one of those to join our 661o, 631o and 781o
7610 and Simba 2B discsView attachment 900733
Improvements in the engine department, upped the hp slightly with better porting of the head and rotary fuel injection pump, and the two speed pto with the selector in the cab.Lovely 7610 in great condition. Very wide front axle track? Also...what's the difference between the II and the III versions?
It's not quite as good as it looks in the photo. It had a respray last year before I bought it. The front axle track is wide because a previous owner has welded it solid so it cannot be narrowed up. It's had quite a few other bodge job repairs done on it by previous owners. Have spent 2.5k on it since I bought it getting problems sorted.Lovely 7610 in great condition. Very wide front axle track? Also...what's the difference between the II and the III versions?