- Location
- Shropshire
Has anybody used the front disc in place of the ripper tine on their Claydon Hybrid, if so how did you find it worked, and did you use a narrower A Share for less disturbance?
I think I am right in saying that the new T4/4.8m drill will offer the option to run a shouldered cutting ring in front of the breaker tine, allowing more soil movement after cutting the trash.This should help when more tilth is needed?
The Spring on those seeding tines looks very wimpy for the fact that there is no longer an aggressive tine running ahead of it opening the soil.Anybody tried this setup?
Thinking of using it to put down ferilizer in spring
on winter wheat. Besides seeding with it.
View attachment 258720
Have you been pleased with the results from your Seedhawk?I suppose the discs would open a slith for the points, similar to the Sim Tec?
After running a Seed Hawk for many years I don't want to leave the tines but would want a disc in front for less disturbance.
I suppose the discs would open a slith for the points, similar to the Sim Tec?
After running a Seed Hawk for many years I don't want to leave the tines but would want a disc in front for less disturbance.
They are stronger than you think, the leading tine runs in between those two so does nothing to help them penetrate anyway.The Spring on those seeding tines looks very wimpy for the fact that there is no longer an aggressive tine running ahead of it opening the soil.