Steevo
Member
- Location
- Gloucestershire
I doubt an excavator would be a patch on a proper ride on vibrating roller.
I can do the middle because I've dug a yard of field away along side and heaped it up so I can track it all...ill put it back after
Is that the length of your track that takes u up the hill??
Well I ain't spending even more cash on a roller when I've got an excavator needing to earn its keepI doubt an excavator would be a patch on a proper ride on vibrating roller.
Wow...I wouldn't want to pay for that!Ah that is a good idea..
Yea its a long road, just under 100 loads of concrete put down in 3.5 weeks!
What mix did you lay? What was there before you laid the concrete?Ah that is a good idea..
Yea its a long road, just under 100 loads of concrete put down in 3.5 weeks!
Wow...I wouldn't want to pay for that!
What did you spend the rest of your lottery win on?Aye it wasn't cheap! and the 100 loads was just for the drive..
What mix did you lay? What was there before you laid the concrete?
What did you spend the rest of your lottery win on?
Always handy having your own quarryRC 35, made one hell of a base for it, was partly an old stone track and partly a completely new road thru fields. all our own stone from my own quarry was used which helped on costs..
Ref cutting it, put in proper expansion joint material every so many meters and leave it at that, do not cut the concrete, esp up in your part of the country!
good point about the preformed joint , we have used the two part plastic one years ago where you insert them in the concrete as you go and pull the top of when its set to allow a mastic seal,they do tend to float out a bit and are not easy to keep straightRC 35, made one hell of a base for it, was partly an old stone track and partly a completely new road thru fields. all our own stone from my own quarry was used which helped on costs..
Ref cutting it, put in proper expansion joint material every so many meters and leave it at that, do not cut the concrete, esp up in your part of the country!
I doubt an excavator would be a patch on a proper ride on vibrating roller.
Trouble is you cant do the middle of the drive with that machine I would guess..
Try concreting just under a mile in one go!
RC 35, made one hell of a base for it, was partly an old stone track and partly a completely new road thru fields. all our own stone from my own quarry was used which helped on costs..
Ref cutting it, put in proper expansion joint material every so many meters and leave it at that, do not cut the concrete, esp up in your part of the country!
i would sooner have a joint not a crack (that sounds bad i know ) i would not go more than 15m not saying your 40m is to far but theres very little expense and effort involved in a few extra cutsYou should have a proper joint at least every 40 metres on an outside slab.
Why don't cut the concrete? It will crack if you don't
I'm only going to be laying them in two loads at time quantities so will just put an expansion board in after every two loadsi would sooner have a joint not a crack (that sounds bad i know ) i would not go more than 15m not saying your 40m is to far but theres very little expense and effort involved in a few extra cuts
sounds ideal ,you need some 12mm plain bars 600mm long drill the end timber shelter and push dowels in half way to tie next slab to when you pull the timber of then put debunking sleeve over remaining bar showing this allows for lateral movement ,treat yourself to a edging trowel and do the ends where they join the radius helps stop any chipping on edgesI'm only going to be laying them in two loads at time quantities so will just put an expansion board in after every two loads
i would sooner have a joint not a crack (that sounds bad i know ) i would not go more than 15m not saying your 40m is to far but theres very little expense and effort involved in a few extra cuts
good we are on the same wave length you can come and do ours its 230m long x 3.4m wideNo I mean a contraction and expansion joint, them steel anchor joint things. Cuts are every 6m
You should have a proper joint at least every 40 metres on an outside slab.
Why don't cut the concrete? It will crack if you don't