Conor bale wrapper

[Buffalo Jim]

Wondering if anyone has any clues as to what’s going wrong ,
The wrapper keeps blowing out the o rings between turntable motor and the cross line relief valve on the side of it , always happens once the wrapper has wrapper 40-60 bales ,

 

[icanshootwell]

Wondering if anyone has any clues as to what’s going wrong ,
The wrapper keeps blowing out the o rings between turntable motor and the cross line relief valve on the side of it , always happens once the wrapper has wrapper 40-60 bales ,

Have you changed tractors? i know my mchale seems to run better on my one tractor, could be the hydraulic set up, closed centre etc.

 

[Buffalo Jim]

Both tractors closed centre ,
Been on both
Have free flow return on both straight into backend not through a spool

 

[powerontheland]

too much oil flow per minute??

 

[H200GT]

Part of the issue probably something to do with the heat generated after said number of bales. In any case the o rings shouldn’t fail regardless of any other issue if correct ones fitted correctly. Check if you have the correct o rings first, there are many different thicknesses and types, could the originals be D rings as opposed to o rings?

edit - call Conner factory direct, they were very helpful when I needed help on a wrapper issue a few years ago.

 

[Cmoran]

I’m nearly certain that’s the same problem my friend had few years back and the factory gave him a valve to put in the line and it solved it. Ring the factory direct there great to deal with in fairness

 

[Buffalo Jim]

Part of the issue probably something to do with the heat generated after said number of bales. In any case the o rings shouldn’t fail regardless of any other issue if correct ones fitted correctly. Check if you have the correct o rings first, there are many different thicknesses and types, could the originals be D rings as opposed to o rings?

edit - call Conner factory direct, they were very helpful when I needed help on a wrapper issue a few years ago.

Have had a hole new motor and relief valve fitted same story again

 

[Buffalo Jim]

I’m nearly certain that’s the same problem my friend had few years back and the factory gave him a valve to put in the line and it solved it. Ring the factory direct there great to deal with in fairness

I must give them a call and see what they say , hopefully they have seen it before and know exactly the problem

 

[Wellytrack]

It does sound like too much oil, also John Deeres do weird things to bale wrappers with their oil setup.

 

[Buffalo Jim]

Dealer been onto conor taking the tractor and wrapper away to sort so we will see what they come up with