• Welcome to The Farming Forum!

    As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.

Damp proofing concrete block wall

-chris-

Member
Location
NR14
We currently batten plastic sheets to the wall inside our old grainstore to prevent damp reaching the barley.

I wondered if anyone has experience of a paint on sealant or waterproof render that could be used internally as a more permanant solution?

Thanks
 

roscoe erf

Member
Livestock Farmer
We currently batten plastic sheets to the wall inside our old grainstore to prevent damp reaching the barley.

I wondered if anyone has experience of a paint on sealant or waterproof render that could be used internally as a more permanant solution?

Thanks
hi we have tried black bitumen paint to some success but with the driving rain we get it still gets through,where we have straw i have lined the walls inside with dpm which works but not much good for grain i imagine,so the only thing that worked here was to baton the wall on the outside and put tyvex and steel roofing sheets on 100% water tight.bit expensive but a proper job,you could use timber but a bit more maintenance involved.
 
Location
Suffolk
I'd look at stopping the rain at source so fixing profile tin as roscoe erf suggests is the way forward. You can put in an admix to cement based render but I would not like to give a guarantee on this. Solid masonry walls are always a problem as they wick moisture from all around. Doing both the above will be costly but effective. At least you can decide on the colour of the tin!
You will encounter problems with forming a cavity wall on the outside at the top unless this cavity goes right to the eaves or gable. There's a barn local to me with this and the frost has got in resulting in the masonry becoming damaged/flaky. Lead will stop this but the cost of the lead wide enough to dress over and go the width of an average modern(isn) grain store won't be cheap.
SS
 

jamesy

Member
Location
Orkney
How about lining the inside walls with stockboard or perhaps dpm with stockboard on top. I lined a bin in a barn with dpm & ply, it did the trick.
 

roscoe erf

Member
Livestock Farmer
[quote="suffolksmallholder, post: 74599, member: 1498"!
You will encounter problems with forming a cavity wall on the outside at the top unless this cavity goes right to the eaves or gable. There's a barn local to me with this and the frost has got in resulting in the masonry becoming damaged/flaky. Lead will stop this but the cost of the lead wide enough to dress over and go the width of an average modern(isn) grain store won't be cheap.
SS[/quote]
and with a cavity not sealed well rodents will love it food warmth perfect:banghead:
 

-chris-

Member
Location
NR14
Thanks everyone for the suggestions, the wall is only 5ft tall with fibreboard sheets to the roof. We have sealed any cracks externally and painted with bitumen which keeps most of the damp out.
 

How is your SFI 24 application progressing?

  • havn't been invited to apply

    Votes: 28 36.4%
  • have been invited to apply

    Votes: 13 16.9%
  • applied but not yet accepted

    Votes: 28 36.4%
  • agreement up and running

    Votes: 8 10.4%

Webinar: Expanded Sustainable Farming Incentive offer 2024 -26th Sept

  • 2,392
  • 49
On Thursday 26th September, we’re holding a webinar for farmers to go through the guidance, actions and detail for the expanded Sustainable Farming Incentive (SFI) offer. This was planned for end of May, but had to be delayed due to the general election. We apologise about that.

Farming and Countryside Programme Director, Janet Hughes will be joined by policy leads working on SFI, and colleagues from the Rural Payment Agency and Catchment Sensitive Farming.

This webinar will be...
Back
Top