Dania D950 Combine

[Tha Ulsterscot]

Hi, I need some help to find parts for the engine of the above, any info or contacts appreciated, Thanks in advance.

 

[Tonym]

What engine is fitted? Dania did not make engines so the engine supplier would be the best route for you to go down.

 

[multi power]

we had old dania with perkins engine

 

[Tha Ulsterscot]

Its a Perkins 4-154 , and I need a front crank fan belt pulley, as well as the drive plate which connects the fly wheel to the drive shaft and pulleys. I may have to get the latter made, but it is just a big cicle with two sets of holes.

 

[multi power]

Its a Perkins 4-154 , and I need a front crank fan belt pulley, as well as the drive plate which connects the fly wheel to the drive shaft and pulleys. I may have to get the latter made, but it is just a big cicle with two sets of holes.

i have never heard that model of engine before, crank pully of another perkins may fit, have you any photo of the combine?

 

[Tha Ulsterscot]

i have never heard that model of engine before, crank pully of another perkins may fit, have you any photo of the combine?

 

[multi power]

that looks very tidy, dad used to have one similar by the look of things

 

[Penmoel]

There were quite a few of those around here early 70' Greens of Lampeter were busy selling them. I think there are still oe or two in sheds. A friend of mine bought the one out of WAC Aberystwyth a couple of years ago , had only done about 500 hours

 

[Field Marshall]

Hi, I need some help to find parts for the engine of the above, any info or contacts appreciated, Thanks in advance.

Hi
Try Valco Marketing in Wiltshire, 01725552384.
They keep parts for the old Dania combines and the newer Dronningborg(including MF) machines.
FM.

 

[Tha Ulsterscot]

Thanks Guys, she is in really good order, and cuts 30 acres every year. She develloped a couple of small oil leaks last harvest, which when it hit the belts went over a large area. The bits needed for the rear of the engine can be made, so they are no problem. I do however need some parts for the front end so all tips are useful Thanks.

 

[multi power]

there is a crankshaft pully from a mf 65 on ebay now, may be thesame