Trying to replace the drop-arm that comes from the steering box on our Defender 90, but can't get it off the spline! In the picture you can see our 2-prong puller done up as tight as we can. Had plenty of WD40 and even a little heat (bearing in mind the box seals which we don't want to ruin!) plus obviously the hammer but again worried about the seals.
Wondered if anyone has any clever ideas?! Are we right to worry about damaging the seals if using more than a little force/heat?
Thanks.
Wondered if anyone has any clever ideas?! Are we right to worry about damaging the seals if using more than a little force/heat?
Thanks.