Deutz Fahr Agrofarm Error Codes T64 T101

[SAME123]

Hi,

Does anybody know what error codes T64 and T101 mean on Deutz Agrofarm 420?

If you sit with your foot on the clutch for longer than approx. 20 seconds, T64 will pop up and the only way for it to clear is to stop the engine and restart. Its a real pain on the road when stopped at junctions as well as around the yard!

T101 is also known to pop up, especially when restarting. Again, you have to stop and try again.


Any help appreciated,

Cheers!

 

[njneer]

Clutch pedal out of calibration , might need calibrated but if it’s only faulting when right at the bottom wind the rubber stop up a bit so the pedal don’t go down as far and check across the level of the clutch pedal compared to the brakes and adjust the top stop so all pedals are level.
Other code is can time out could be any number of things , get the clutch issue sorted and it might cure both.

 

[Classichay]

Clutch pedal needs calibrating it thinks your riding the clutch, stops you burning the pack out.

 

[jem890]

Hello, does anybody know what error code T129 is? My model is 5120c. Thanks

 

[lorries22]

Does anybody know what error code M 89 is on a 5120?

 

[Dave eire]

Does anybody know what error code M 89 is on a 5120?

Any luck

 

[lorries22]

Water in fuel filter
Unplug water sensor and unscrew drain plug let water out until fuel comes out and retighten drain plug and refit sensor plug

 

[Dave eire]

Water in fuel filter
Unplug water sensor and unscrew drain plug let water out until fuel comes out and retighten drain plug and refit sensor plug

Thanks pal. Ya got it sorted

 

[Ben-]

Hey guys, how are you finding the 5120C?

I am looking at a used 2018 model vs a 5105G.

Don’t know much about the 5C range - looks similar to the 5G. Maybe the predecessor? Any feedback welcome.