glasshouse
Member
- Location
- lothians
looking for a blade to go on 180 hp tractor front linkage.
old one off a dozer would be good.
old one off a dozer would be good.
dozer blade for front linkage
- Thread starter glasshouse
- Start date
- Location
- south norfolk
You will need a really good front linkage for that,preferably with a push bar to the rear of the tractor.
Nick...
Nick...
glasshouse
Member
- Location
- lothians
its a wilson front linkage, nice and strong with side plates to the bell housing
- Location
- south norfolk
You will be fine then.most linkages only fit onto front tombstone.have you looked on ebay for a blade
Nick...
Nick...
glasshouse
Member
- Location
- lothians
Dont like them at all
clunk
Member
- Location
- Lesmahagow
look for a 3 in 1 digger front bucket and just take the front jaw off makes a great dozer blade for the front of the tractor and all the strengthening in the bucket is in the right sopts for a front linkage
glasshouse
Member
- Location
- lothians
Or maybe leave jaw on? Would be useful at times
- Location
- Hockley Essex
Bomford used to make them, quite popular on a county back in the day
Seen one made from the dozing blade off an 8 ton 360 fitted to a Tm175 front linkage
timmyboy
Member
- Location
- Bury St Edmunds
www.ebay.co.uk/itm/Britains-Toys-Model-Snow-Plough-Tractor-Shovel-VGC-England-Dozer-/122306535665?hash=item1c7a09a0f1:g:F2YAAOSwUKxYdRfc
One here on E Bay @glasshouse , just what you need. A push bar for the back of the tractor and it's a Bomford. I've got a tractor to fit somewhere but I'm thinking it might want a tyre on!
glasshouse
Member
- Location
- lothians
i remember having one of them.
www.ebay.co.uk/itm/Britains-Toys-Model-Snow-Plough-Tractor-Shovel-VGC-England-Dozer-/122306535665?hash=item1c7a09a0f1:g:F2YAAOSwUKxYdRfc
One here on E Bay @glasshouse , just what you need. A push bar for the back of the tractor and it's a Bomford. I've got a tractor to fit somewhere but I'm thinking it might want a tyre on!
timmyboy
Member
- Location
- Bury St Edmunds
Bet you haven't still got the spacer for the 135.
glasshouse
Member
- Location
- lothians
lost nowBet you haven't still got the spacer for the 135.
quavers
Member
- Location
- aberdeenshire
don't think this is a good idea ,heard of tractors and front linkages being damaged by just snow ploughing with out the weight of a dozer blade and heavy duty work , phone billy Wilson of clatt your self and discuss your idea and sure he will be thinking the same . top bloke he will tell you one way or the other .
fermerboy
Member
- Location
- Banffshire
The Wilson lift is good but depending on which breed of 180hp, I'd have the bracing to the back axle. Wilson's did/still do that option.
glasshouse
Member
- Location
- lothians
Not a big job to add the axle bracing.
Not going to be doing heavy work
- Location
- Larne, Northern Ireland
