ex60 electrics

Bloders

Member
Location
Ruabon
Hello again.
None of the Hitachi EX60-2 "dash" gauges and throttle controls work.
fuses seem ok (none are blown)
Any suggestions please
thank you
 

Mursal

Member
Turn on ignition, earth temp wire off the engine block, if wiring good gauge should deflect / move Do the same with fuel sender wire. Both share a voltage stabilizer on the supply front the ignition switch, somight be worth a look?
 

Bloders

Member
Location
Ruabon
done some "digging"
there is no power getting to the fusebox - if I put power there, everything works. Without it, no gauges, nor heater etc.

Any other suggestions welcome! I am tempted to run a power wire straight from the isolating solenoid to the fusebox.
Will this mess it up badly?
thank you
 

Will you help clear snow?

  • yes

    Votes: 72 32.1%
  • no

    Votes: 152 67.9%

The London Palladium event “BPR Seminar”

  • 15,643
  • 242
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top