Fendt 724 transmission oil capacity

[bondenfredrik]

As the title says, wat is the transmission oil capacity for a 724, 2018 S4.
Book says, first fill 58litres, and then another fill is 47litres.
Stick is hard to read and i dont want to start it up with 10litres to much or less..

 

[bondenfredrik]

 

[David1968]

Don't know anything about the Fendt dipstick, but I often have to press a transmission dipstick onto a piece of paper to see where it's at.

Or I could go and get my reading glasses, of course

 

[bondenfredrik]

 

[bondenfredrik]

SAme question here, 64 or 79litres in hydraulic, easier to ask then to get it out...

 

[76masseyman]

It would make it easier to understand if the manufacturer put ‘dry fill’ and ‘wet fill’.
Dry fill of a new tractor, or new component is usually more, as when it comes to servicing, very rarely does the whole component get emptied, so wet fill is usually less. There will be a certain amount of fluid in the system that doesn’t drain when emptying.
Some hydraulic machine tanks only hold a fraction of what is in the full system.

 

[bondenfredrik]

Yes, same info as i got from dealer. But mine took almost 50litres before it reached oilstick..

 

[Southmec32]

Put a small cable tie on the full line. Makes it alot easier

 

[MF CI]

Just take what the book says to get an idea of how much oil to have at hand and then fill to the dipstick.

 

[bondenfredrik]

Just take what the book says to get an idea of how much oil to have at hand and then fill to the dipstick.

Yes, but i noticed that you need to start it up before you got it right from dipstick, several litres went in to the system.

 

[Lewis821]

Remember to start it and move it slightly and check it again,
1 morning in about 10 mine has nothing on the dipstick just depends how it stopped.

 

[Chae1]

Measure what comes out and replace it?

 

[bondenfredrik]

Measure what comes out and replace it?

Yes, thats about what i did.