fendt

Wanted 20 spline PTO shaft for 3230 fastrac.

Not in the market for either but if i were to buy either 2nd hand which is the better built tractor?/more reliable etc John deere look like tidy machines and are far more popular than fendt but fendt gets a good name as a premium tractor, why are JD sales so much higher? Is it true that fendt...

Has anyone got any long term experience of a Fendt 1050? It will be pulling a 5m low disturbance subsoiler and a 12m drill. It might be a suitable compromise between the 2 operations as a twin track would be better on the subsoiler but I really don’t like them on a drill. I am looking at...

Written by CPM Magazine from CPM Magazine Download PDF Tyres are always more than they appear, acting detrimentally to soil health or, when the correct wheels, tyres and pressures are used, in a way that can minimise compaction, improve operations can cut costs. CPM speaks to a farm manager...

Looking for a set of 10 stud fendt rear rims to take 650-65-42 tyre , or would take a set with tyres at right price contact Paul on 07768 273589

Evening all Has anyone looked at 3rd party autosteer that drives the steering valve directly on an 8S? Was at an 8S 245 tonight, all over the CANBUSes but no sign of the steering valve at all. It has an extra screen for guidance, but the seller removed all the GPS kit leaving just the VDO4...

Is there a way to get the tractor to lift the drill automatically when crossing the headland? I use the Go / End button with a pre recorded sequence for pto/cruise/lift arms but I was wondering if I could fully automate it so that the tractor drops her in and lifts her out when you cross the...

I’m looking for someone to do some retrospective numbers for calculations of structure/loads etc. I’ve got a professionally built cold-rolled steel frame agricultural building (finished a couple of months ago). Building Control have now decided it needs their sign off (too close to another...

Fendt 9T Combine Harvester On board with Scott Nicolson from Peacock & Binnington during their #fendt and #masseyferguson harvester demo in Lincolnshire #farming #farmequipment #harvest #farminguk #thefarmingforum #agcocorp #combine

Anybody else becoming increasingly annoyed with the trade across the board? The manufacturers have hiked new prices to unprecedented levels out of reach to majority of farmers. £250,000 for 250hp tractor is unaffordable. At the same time they are offering 50% less than market value for trade...

Currently running a Novatel receiver and N Trip RTK on a gen 6 724. I I do get issues with the mobile signal dropping out, on one block of land in particular. At the same time the phone signal there has got to a point where it is often difficult to call. With the 3g signal being turned off I...

What would you replace with, Was debating 7s180 or 6s180 But what about other brands? What's fendts equivalents?

8460 dyna vt hare and tortoise start flashing when attempting to switch down to tortoise, tractor goes fine in hare, any pointers? Thanks

Interested in this plough to go on a Fendt 516. Looks like Crummack bought it at a sale, judging by the sale sticker. I’m in Somerset so Yorkshire is a long trip to go and look at it. If anyone one has any intel on it it would be appreciated. I’ve been in the hunt for a five furrow Lemken Vari...

Random question can a big baler be ran on the pickup hook? Got a claas on demo that was on a ball and spoon but was swapped back to need the drawbar so is there any reason why it couldn't be ran on the hook with the right size eye bolted on . Also looked at an old massey at a mates place and it...

Written by Justin Roberts from Agriland Setting off from the very northern tip of Scotland in the first week of May, on a cabless tractor, heading for the very southern tip of England, would appear somewhat heroic given the inclement weather being experienced of late. Indeed, it was a thought...

Anyone know which Trimble platform kit fits an Agribuggy 2800? From what I can see it seems to be New Holland steering column/splines but haven't quite got to the bottom of it. Looks like there might be a couple of options 78100-02-RS or 78100-32-RS.

As fitted to a John Deere 8440. Its gone pop, can't seem to find one at reasonable money in stock anywhere.

I m really struggling with anxiety anymore else struggle with this? Coping and working with it gets quite tough.Yesterday I did a self referral for NHS talking therapy.

Written by Justin Roberts from Agriland There has been much attention paid to ultra shallow cultivation over the last few years, and at a recent launch day in Austria Pottinger threw its hat in the ring, with the revealing of its Plano VT 6060. Described as a stubble cultivator, the machine...