Fendt Topcon RTK aerial

[Spencer]

Anyone have one spare for cab roof? Are they Agco specific?
Just got radio modem and mobile base and have wires etc, but missing the aerial and is there a mount I need?

 

[Northern farmer]

RF signal is not brand specific but frequency specific. A good cable can handle anything that is used for correction signal, the antenna needs to be good for the frequency your base is using (and your tractor receiver radio, frequency range printed on the modem). Do you have the cable #12 on the figure?

 

[Spencer]

Thank you.
Yes I have the cable, from your diagram I’m missing 14, 15 & 16. Frequency range is 455-459 MHz, 25 KHz. Haven’t contacted Fendt dealer yet for a price, anyone know the part numbers? Or wether electronic supplier might have something..

 

[Richard Smyth]

14 and 15 is basically a bulkhead adapter to get the cable through the roof and seal it to the elements. Any uhf antennae in the 450 MHz range should work. From memory you need a tnc connector on the end of it.

 

[Charlie M]

You need 14 & 16. Part 15 is the little black plastic cap. I tried looking for the part numbers last night but Agco parts seems to be not working at the moment. I’ll keep trying.

 

[Richard Smyth]

Assuming parts numbers are the same worldwide.

 

[Charlie M]

You beat me!

 

[Richard Smyth]

And we even managed to get the same numbers

 

[Charlie M]

Googled the part numbers

 

[Spencer]

Thanks @Charlie M
Thanks @Richard Smyth