Fendt Trimble AB line heading number

[Deerefarmer]

When running a+ angle you get a heading number that you can share with other machines, but when running ab line what number do you need for a heading? On 828 with factory auto steer

 

[Wombat]

Depends if Agco show the angle conversion for the A and B line in their algorithm and terminal

 

[Deerefarmer]

You mean like a process to convert the numbers in the first pic into a heading like the second one?

 

[Wombat]

Yes some terminals would give you the angle (heading) for the line as well as the points for A and B, but it seems the Fendt one doesn;t unless its on another screen or you can switch from a and B to A plus heading and it calculates it

 

[Deerefarmer]

Thanks.. I'll have to experiment some more

 

[Northern farmer]

Depends if Agco show the angle conversion for the A and B line in their algorithm and terminal

Out of curiosity, why do you want to transfer AB-lines as a point and heading, is there a screen that does not take A and B points for an AB-line?

 

[Richard Smyth]

Why not just transfer the lines on USB. Would take 2 minutes