Fitting rotometer to JD750a

[Wheatland]

This is the project for today, can anybody post pictures of where the flexipipe from the rotometer fits intothe drills airstream please.

TIA

@Simon Chiles
@Clive @H.Jackson @Fish @Big-Al

 

[Big-Al]

Is this what you want, lucky just caught me in the office counting my money
first one is planting spring barley end of april and as you can see i have made the pipe
to the venturi bigger than the green seed pipe in the last pic as i have two venturis
on the 6m drill it was hard to get the same rate in both pipes from the terracast V2
hope this helps

this one from the inside before fitting

 

[Simon Chiles]

This is the project for today, can anybody post pictures of where the flexipipe from the rotometer fits intothe drills airstream please.

TIA

@Simon Chiles
@Clive @H.Jackson @Fish @Big-Al

As @Big-Al said, fit the outlet of the Rotometer into the Venturi for the seed on the opposite side to the seed meter.
I cut a hole and welded a tube to the cover.

Contact me if you have an isobus drill and want a gizmo to make the Rotometer’s metering unit run when the drill motor runs.