RTK2Go sites?There are 6 free rtk spots in aus
Garenteed there is nothing within 50mile of @TelesnaAg
It costs about £300to set your own base up sub free for ever
He's not far from Melbourne, so might be in luck
RTK2Go sites?There are 6 free rtk spots in aus
Garenteed there is nothing within 50mile of @TelesnaAg
It costs about £300to set your own base up sub free for ever
YesRTK2Go sites?
How does ot steer?View attachment 1121218
Agopengps
Plenty information available how to build and install autosteer and section control without changing the steering wheel. Correction signal is subscription free, 2cm rtk accuracy, and all for less than £1000
None of those listed sites are close unfortunately guys...bugger.RTK2Go sites?
He's not far from Melbourne, so might be in luck
You actually have a CORS system operating in Vic, might be worth asking the questions on cost, Ant? I am using a VRS sytem here now, and it is great as long as you have mobile data coverage, which I am guessing you have....None of those listed sites are close unfortunately guys...bugger.
Ant..
Cheers will check out, i have 5g tower 200m up the road.You actually have a CORS system operating in Vic, might be worth asking the questions on cost, Ant? I am using a VRS sytem here now, and it is great as long as you have mobile data coverage, which I am guessing you have....
Vicmap Position
Vicmap Position - GPSnet™ is a subscription based positioning correction service for Global Navigation Satellite System (GNSS) users throughout Victoria.www.land.vic.gov.au
There is also https://gnss.ga.gov.au/stream
I'm just a poor old fashioned hill livestock farmer, so my setup is steered using the calloused, now arthritic thing on the end of my armHow does ot steer?
Ant...
Ok so who is going to assemble all this and print it, calibrate it, manufacture the harness, weather proof it etc...I'm just a poor old fashioned hill livestock farmer, so my setup is steered using the calloused, now arthritic thing on the end of my arm
However, look in the agopengps forum hardware, and there's how to use an electric motor driving a self 3d printed cog, friction drive onto the steering wheel, hydraulic steering valves, and even tractors canbus if its guidance ready
Why pay tens of thousands for a package that requires a new steering wheel, plus thousands for an annual subscription, when the hardware for agopengps costs less than a years subscription, and the rest is free?
My agopen autosteer and base stands me £1400...Ok so who is going to assemble all this and print it, calibrate it, manufacture the harness, weather proof it etc...
It not tens of thousands, its 10 thousand total max, fjd came in at about 8500 aud inc base station, so no annual subscriptions.
Ant...
I am at basically the blue dot, about 30 35km from each station.You actually have a CORS system operating in Vic, might be worth asking the questions on cost, Ant? I am using a VRS sytem here now, and it is great as long as you have mobile data coverage, which I am guessing you have....
Vicmap Position
Vicmap Position - GPSnet™ is a subscription based positioning correction service for Global Navigation Satellite System (GNSS) users throughout Victoria.www.land.vic.gov.au
There is also https://gnss.ga.gov.au/stream
All you need is some bracket,and a 80quid motor and a wheel angel sensor nowI'm just a poor old fashioned hill livestock farmer, so my setup is steered using the calloused, now arthritic thing on the end of my arm
However, look in the agopengps forum hardware, and there's how to use an electric motor driving a self 3d printed cog, friction drive onto the steering wheel, hydraulic steering valves, and even tractors canbus if its guidance ready
Why pay tens of thousands for a package that requires a new steering wheel, plus thousands for an annual subscription, when the hardware for agopengps costs less than a years subscription, and the rest is free?
And something to actually do while sitting in the cab for days on end?All you need is some bracket,and a 80quid motor and a wheel angel sensor now
I remember them developing this as the guys were on thecombine forum in usa, think the blokes were from canada cant remember.All you need is some bracket,and a 80quid motor and a wheel angel sensor now
I remember them developing this as the guys were on thecombine forum in usa, think the blokes were from canada cant remember.
I cant find a website for them only there discourse page.
?
Ant...
Thing to remember is theres no real riggt or wrong way,if it works for you etc..plenty of help on here for youI remember them developing this as the guys were on thecombine forum in usa, think the blokes were from canada cant remember.
I cant find a website for them only there discourse page.
?
Ant...
Yep i got the discourse page, but no product website?
With a battery its about half price than fj or chc, they are running same board as fj by looks.Plug and play RTK base station based on the F9P receiver...
SparkFun RTK Reference Station - GPS-22429 - SparkFun Electronics
The SparkFun RTK Reference Station is the perfect solution for your high-precision geolocation, surveying, and time reference needs.www.sparkfun.com