Flashing from big 6 asbestos/fibre cement panels

milkloss

Member
Livestock Farmer
Location
East Sussex
Perhaps I've got it wrong but I'd bolt the 6 profile under the vertical sheet and have the flash covering the lean-to edge that's butted up against it.

wavy edge at the top and bolted under a vertical sheet, plain edge over the lean-to.
 

milkloss

Member
Livestock Farmer
Location
East Sussex
30E1C8EB-1D59-48A1-9F96-05514FB7B5A1.png

Black is atcost, red is flashing, blue is lean-to.

something tells me I've got the wrong end of the stick though!
 

Greenbeast

Member
Location
East Sussex
oh yeah, it's the shed that has the big 6 as a wall and i've yet to determine what the lean to will be, but probably steel sheet roofing.
My step-dad said if we get some warm weather we could just fibreglass between them, so we might end up doing that
 

miniconnect

Member
Location
Argyll
if you go steel sheet leanto, just get a 8inch reverse flashing made to 110 degrees or whatever your pitch is. I'll take a pic of our if I remember.
 

JD6920s

Member
Mixed Farmer
Location
Shropshire
Are you on about actual asbestos sheets? Or fibre cement Big 6 sheets because there is a big difference
A difference in what way other than material?
We have some asbestos curved sheets that we would like to find a match for to repair some damaged sheets and I’ve been told that you can manufacture to match our radius, but will the profile match too?
 

Will you help clear snow?

  • yes

    Votes: 68 32.1%
  • no

    Votes: 144 67.9%

The London Palladium event “BPR Seminar”

  • 9,451
  • 123
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top