rich
Member
- Location
- cardigan, west wales
Hi, I need to replace the sender unit, is it possible to do this with the q cab in place? all tips welcome!!
thanks, rich.
thanks, rich.
Could well only be the float needs replacing,sprung a leak and sunk to the bottom,still need to take the whole thing out tho.just take the dash out, blown the rubbish out with air line maybe, undo the tabbed ring or maybe screws depending and go steady - turn sender a few different ways round as you lift it out. You will loose some skin maybe.
Fit a new sealing ring
Check the wiring loom is not rubbed through on the top of the tank