Grey Fergie Tef20 Not starting.

[jcross]

Baded upon the fact that the diaphragm might be the issue does anyone know where to get the correct one? I got mine of agriline

 

[multi power]

Baded upon the fact that the diaphragm might be the issue does anyone know where to get the correct one? I got mine of agriline

Welt let's just say I got some stuff from them last week. I won't be getting anything else from them. I would try a better diaphragm

 

[Netherfield]

You could try

http://www.feather-diesel.co.uk/

There is another who advertises in the old truck magazines, specialist in the old stuff.

http://www.bobbeckdiesels.co.uk/

 

[Mursal]

And you are sure with the engine running you have a suck on the pipe going to the governor on the pump ...........

 

[multi power]

How difficult would it be to manually over ride the governor and manual control the rack for testing purposes?

 

[John 1594]

How difficult would it be to manually over ride the governor and manual control the rack for testing purposes?

easy, i have a video of me doing just that with the 20 i had, but i cant work out how to post it on here despite numerous attempts at doing so

 

[Philip Watkins]

easy, i have a video of me doing just that with the 20 i had, but i cant work out how to post it on here despite numerous attempts at doing so

You can't upload video here, you need to put it on YouTube or similar hosting site then link to it.

 

[John 1594]

video is on facebok but every time i copy and paste the link adress to here it says its no longer available

 

[Mursal]

Have you it set for private or public viewing?

 

[John 1594]

Have you it set for private or public viewing on U-Tube?

its on facebook and i cant work out how to get it from there to u tube...to here

basically all i did was take the entire governor housing and diaphram off and control the position of the fuel rack with my hand

 

[Mursal]

Click on the video reel, its icon 5 in from the right above where you type. Place the link in the box and press embed, will that work?

 

[John 1594]

right, lets assume that hasnt worked

 

[Mursal]

No that didn't work ..................

Try uploading to U-Tube and pasting it in the box ...........

 

[Mursal]

Hardly worth it as we know exactly what you mean from your description ..............

 

[John 1594]

https://www.facebook.com/video.php?v=756323471059218

 

[John 1594]

Success!!!!

Didnt realise it had privacy settings...doh!!!!

 

[tomlad]

Sorry to butt in
first point. Patrick at fergie land . Edwards I tink is a good helpful man on fergies
based in Derby
worth a phone call. ?

Last time I messed with. /tested the seals on diaphram area.. If I recall correctly pull out pull to Stop
hold fingers/seal seal bango union to inlet area.. banjo bolt removed.
then release the pull to stop
u should be able to hold/sseal the rack in the off end
if this makes sense ? ????
if it pops straight back then there is a leak some were.
diaphram /ssteel pipe

Typing on my phone sorry .ddriving me crazy ..


Also check that mushroom bolt filter on the atmosphere side of the diaphram is clean .. Could be removed for a test ? ??

Hope this makes some sense
ta
as already stated they do wear the spindle for the butterfly then draw air in .....

 

[Loftyrules]

@tomlad are you a TE20 expert? I am looking for some help with mine based near Burnley

 

[tomlad]

Not really mate
I own a few
what is the problem ?

 

[pycoed]

Bump!
Did the OP get this running?