- Location
- 200 miles N,NW of New York
I have a Haverhill welder gen, like this one below
now once you start to use power, the engine is running fine, but the volts drop off to nothing,
and same with welding, every thing running fine, soon as you strike an ark, again the power drops off to nothing, but the engine is still running as it should, and it dont kick in and drag the engine down a little to kick the govener in and pull hard,
i think it might be the condencer, its looks like a 40mm round by 80mm tall and 2 wires to it,
would i be right?
TIA john
now once you start to use power, the engine is running fine, but the volts drop off to nothing,
and same with welding, every thing running fine, soon as you strike an ark, again the power drops off to nothing, but the engine is still running as it should, and it dont kick in and drag the engine down a little to kick the govener in and pull hard,
i think it might be the condencer, its looks like a 40mm round by 80mm tall and 2 wires to it,
would i be right?
TIA john