Help! MF 7616 fan plug

[Dukes Fit]

Can anyone tell me what type of plug is on the end of the main cooling fan of a 7616?

Somebody unplugged it to replace the drive belt and forgot to plug it back in again....somebody is me

 

[davidroberts30]

So where did it end up?

 

[Robt]

Looks like a 3 pin super seal

 

[Wombat]

Looks like a 3 pin super seal View attachment 1048829

5 Pin

 

[Dukes Fit]

So where did it end up?

In several pieces somewhere, when the realisation hit me I checked and it was just bare terminals left

 

[Nearly]

@masseybreaker

 

[Dukes Fit]

Looks like a 3 pin super seal View attachment 1048829

It's slightly different from a superseal. Got a different keyway and a lip round the outside.

This is a 6 pin superseal

 

[Robt]

is that j r power timer then? Been a while since I did me plugs exam

 

[Timbo]

Agco do pins and connector housing as separate parts. You'll need the proper crimper to attach the pins...

I believe they also do a repair kit which is the plug and a length of cable.

 

[davidroberts30]

i do believe they do a small section of loom anyway about 15 inches long

 

[davidroberts30]

In several pieces somewhere, when the realisation hit me I checked and it was just bare terminals left

 

[davidroberts30]

About 40 quid

 

[Dukes Fit]

Agco do pins and connector housing as separate parts. You'll need the proper crimper to attach the pins...

I believe they also do a repair kit which is the plug and a length of cable.

I thought they did as we've had component part plugs in the past for the combine but dealer says no only full harness available.

 

[Dukes Fit]

About 40 quid

That's much better than the £161.22 that the dealer wanted

 

[davidroberts30]

That's much better than the £161.22 that the dealer wanted

Chase your wires back should only be a short section

 

[Dukes Fit]

is that j r power timer then? Been a while since I did me plugs exam

BWCS fan by the look of it.

 

[Robt]

BWCS fan by the look of it.

I meant the plug not the fan