Hi all,

[Agri man]

I have a mchale fusion1 here and when the bale goes onto the rapping table the rapping ring only rotates 3-4 times before flashing safety swich on the control box and beeping. Seems to work ok in Manuel,
Anyone here ever had this problem or knows to to fix it? Thanks in advance.

 

[v8willy]

Far as I know saftey switch will be 1 of 2 things, either the wrapper table is dropping or the side door is open.
The door switch could be faulty but more likely the wrapping table.
The table will have a sensor on it, we had to replace a few on ours at the time & I think the sensors on the newer models were upgraded but it's a long time from I had anything to do with fusion 1.

 

[Agri man]

itls the sensor for the rapping table the blue one where u open the door to fill rap