- Location
- Lincs / Cambs border
Yes no problem at all . This 10.5 m drill has run fine with a single accord fan mounted on the front hopper .
Home build dd tine drill??
- Thread starter MattR
- Start date
clbarclay
Member
- Location
- Worcestershire
You plan on extending all the 32mm hoses?
It's probably doable, though care will be needed to make sure they aren't stretched, pinched or dip too much when turning if the cultivator is trailed from the hopper.
It's probably doable, though care will be needed to make sure they aren't stretched, pinched or dip too much when turning if the cultivator is trailed from the hopper.
- Location
- E Yorks
Is that with a std accord fan or the bigger accord fan?
- Location
- Lincs / Cambs border
That was a standard one . We now use the weaving fans and they have a huge output .
- Location
- E Yorks
You were doing well with the std fan the carre fans that weaving and others use are in a different league. Are you on 110mm transfer pipe?
- Location
- Lincs / Cambs border
Yes , all of our drills are on 110mm .
Yep that's right, just a thought really.
Yes that is certainly something to consider, thanks.
Are there any potential problems using a 32-outlet mushroom from a 4m drill and blocking off however many for the number of rows required?
- Location
- Lincs / Cambs border
Fit the mushroom on the coulter bar , weavings will make you a mushroom with the amount of out let’s you require .or you can get a 24 outlet head and a plate that reduces it to 18 .
clbarclay
Member
- Location
- Worcestershire
I would convert the fan to hydraulic drive anyway, unless you are like to need to use it on a very old tractor, like something 1980's vintage or older.
Devon James
Member
- Location
- Devon
I have asked before on the forum, but where is the best supplier of seed hose please?
- Location
- Lincs / Cambs border
Weavings
Devon James
Member
- Location
- Devon
Do you get mates rates?!
- Location
- northampton
How much do you need and what size think GRANIT had some on special offer £3.75/m I think for 32mm black
alomy75
Member
Didn’t you have some melt in the sun?
He definitely has a loyalty card...I think just one more purchase and he gets to name the next drill...the Weaving BobBob maybe...
- Location
- Lincs / Cambs border
Wish I did .
- Location
- S Yorkshire
I have used this on an air seeder in the past, dont know how the price compares .
Devon James
Member
- Location
- Devon
Asking the view of the collective before spend money on the wrong thing. We plan to blow grass seed back to this upstack from a front hopper. The delivery pipe along the tractor is 5 inch. The upstack 4 inch. I need to buy 32mm ID pipe to go from the upstack to the rollers
Will we run into back pressure issues with the change in diameter on the pipes? I was hoping there won't be too much air needed to get the seed back, and by using all the outlets on the head unit it will be ok?
Will we run into back pressure issues with the change in diameter on the pipes? I was hoping there won't be too much air needed to get the seed back, and by using all the outlets on the head unit it will be ok?
- Location
- Lincs / Cambs border
No you won’t have any issues with back pressure. I’ve got a load of spreader plates if you need some .
Devon James
Member
- Location
- Devon
Thankyou, sorted for them. Ordered hose from Weaving today.
- Location
- Lincs / Cambs border
Did you tell them to remember my commission
