Horsch co drill controller dead...

[Wigeon]

As above- I've got the agtron 2 box set up, and its lifeless.

Always leave it plugged in, in the cab, but 'someone' took it out, and it's now dead- master switch does nothing. Have sprayed every plug and socket with cleaner, have tried gently massaging the switch (usually works) etc, but nothing. Power is from leads straight off the battery.

I know these are notoriously cr@p, but is there anything else I can try?

Hoping to poke some beans in tomorrow, though that may become a distant dream at this rate...

 

[lexion780tt]

Dose the one with the screen come on if you plug wire straight from power controller into it without switch box

 

[Wigeon]

Don't think so- not there at the moment though. If it does come on, what does that mean? Thanks!

 

[lexion780tt]

Either switch box has gone or you have a fault with the power module have you checked the power module?

 

[PSQ]

The pins on the plugs are well known to bend when connecting, and the power supply boxes are known to ‘go up the Fritz’. Your friendly Horsch techs will be better qualified to advise...

 

[Wigeon]

Either switch box has gone or you have a fault with the power module have you checked the power module?

Is that the black box? Short of sticking multimeter into holes randomly, how else would I check it? Thanks. Apologies, not an expert at this...