How are people finding SF3??

[Slick]

Be interested to hear how you get on with your 6000 dome we drilled all but 40 acres last spring and back end on sf1 on a 3000 dome and it worked fine it just couldn't cope shoving the front press up and across a slope on the loose ploughing we tried sf2 for 40 acres and wouldn't say it was much if any better there's still a couple of wide bits on a sidling

That's a calibration issue nothing to do with signal.

 

[KB6930]

That's a calibration issue nothing to do with signal.

Calibration is fine it just can't steer enough if the press is properly down when you come onto a sharp slope it doesn't take much weight back onto the front wheels to sort it but it does need some.

 

[Speedstar]

Had a 6000 since end of August love it, huge difference over the itc I had before it.

So are you still on SF1 with the 6000 dome ?, As dealer tells me you can not have SF2 with a 6000 dome

 

[General-Lee]

So are you still on SF1 with the 6000 dome ?, As dealer tells me you can not have SF2 with a 6000 dome

Yes sf1 which is adequate for us, I did use one of my grace periods but it only went to sf2 not sf3 which I thought was strange.

 

[Louis Mc]

Yes sf1 which is adequate for us, I did use one of my grace periods but it only went to sf2 not sf3 which I thought was strange.

It actually probably was sf3 but screen was just calling it sf2, pretty sure this happeNed is in the autumn

 

[General-Lee]

It actually probably was sf3 but screen was just calling it sf2, pretty sure this happeNed is in the autumn

Ah right sounds feasible I guess, you reckon older screen wouldn’t show it?