I need help with John Deere operations centre sending stuff to my tractor...

jpn

Member
Arable Farmer
We have a 2019 6175r with fully activated jdlink and everything is set up properly, however if i make a AB line or boundary in operations center it doesnt automatically send it to my tractor... am i missing something or does it not work like this - do i need to do something else? On the tractor it is set to send and receive these things to and from operations center.

Help will be appreciated, thanks
 

Jolly Green

Member
Arable Farmer
I seem to have the same problem. Tractor sends info to operations centre fine (works better when connected to WiFi), but doesn’t sync any changes made on the website or app.
I’m hoping if the tractor uploads info to operations centre it should be simple to get it receiving.
 

marcot

Member
Arable Farmer
Location
Bury St Edmunds
We have a 2019 6175r with fully activated jdlink and everything is set up properly, however if i make a AB line or boundary in operations center it doesnt automatically send it to my tractor... am i missing something or does it not work like this - do i need to do something else? On the tractor it is set to send and receive these things to and from operations center.

Help will be appreciated, thanks
I had some tuition a while ago on this and its not an automatic process sending back to the tractor. I can't remember the exact process but you have to create a file on your PC and instruct it to be sent ....
 
Tags
ab line

AGCO reports sales increase of 43.5% compared to 2020 figures

  • 112
  • 0
Written by Agriland Team from Agriland

The tractor manufacturer AGCO, which consists of brands such as Challenger, Fendt, GSI, Massey Ferguson and Valtra, reported its results for the second quarter ending June 30, 2021.

Net sales for the second quarter were approximately $2.9 billion, an increase of approximately 43.5% compared to the second quarter of 2020.

AEM

Reported net income was $3.73/share for the second quarter of 2021, and adjusted...
Top