Idea for wrapper manufacturers

[hoff135]

Pretty simple, would it be possible to have a piece of equipment spray the last few feet of wrap before it was cut with some sort of adhesive?

Pain in the neck these ends trailing everywhere especially in windy weather. If you are on the road they are blowing all over the road so you have to get out and tuck them in or cut them off. Or the go below a wheel and get left in the field. Loaded trailers are even more hassle.

Surely this could be done?

 

[deleted user 837354]

I don't understand the grief with them. You have to get out and put straps on to secure your load anyway, just tuck in any tails then as you walk around?

 

[Deerefarmer]

Or better yet, buy or hire a chopper and be done ??

 

[rookswood]

Are you getting long tails with a mchale wrapper? I changed from mchale to a vicon wrapper because I had had enough of bit of plastic every where and having to cut tails of everload before going down the road. No problem with the vicon.

 

[powerontheland]

Change your brand of wrap! I changed away from Cordex as I found the wrap wasn’t tacky enough and I was getting long tails, had some from them last year and it was far far better.