Jasic 180amp Inverter welder 240V

[Welding Supplies Direct]

We have 20 of the Jasic Power ARC 180SE welder packages at a very low introductory offer price of £165.00 to TFF members ......... please feel free to check the internet this is an unbelievable offer !!!

To evaluate or place an order go to :

https://www.weldingsuppliesdirect.co.uk/jasic-power-series-arc-180-se.html

USE TFF165 AT THE CHECKOUT TO GET YOUR SPECIAL NET PRICE.

You will not find this offer outside The Farming Forum

 

[Welding Supplies Direct]

This very popular branded machine is selling quickly, please be aware that we can not and will not be allowed to offer you this price once that our current stock is gone.

 

[Welding Supplies Direct]

Dont leave it to late get yours without delay !!

https://www.weldingsuppliesdirect.co.uk/jasic-power-series-arc-180-se.html

 

[Andrew K]

Where are these machines built please?

 

[Welding Supplies Direct]

The machines are re-engineered and built in China, Wilkinson Star who brought Cebora and Mosa machines into the country are now the sole importers for the Jasic brand. The machines are one of the most popular brands of machine now in the UK because of the build quality, warrantee and back up support (based in Manchester). Jasic are one of the biggest manufactures in the world and produce machines for well nown welding brands.

Regards Jonathan

 

[Welding Supplies Direct]

We are down to our last 10 machines, unbelievable interest in this offer !!! ......... the price will go up once they are gone so iff you wish to get one do not delay.

Jonathan

 

[Cropper]

Do these welders run off a 13A socket?

 

[Welding Supplies Direct]

Do these welders run off a 13A socket?

This machine will run off a 13amp supply up to about 150Amps, but to get max power we would recommend a 16 amp supply.

Regards Jack - WSD

 

[Stock]

I've one for two years and can't fault it, and alas it cost a lot more than the offer here, do they still do the five year warranty?

 

[Mursal]

Talk about a backhanded compliment ................

"Do they still do the five year warranty"
Probably why it was dearer, no?

Looks a nice welder ..........
Burn 12's all day long, I'd say

 

[Stock]

Talk about a backhanded compliment ................

"Do they still do the five year warranty"
Probably why it was dearer, no?

Looks a nice welder ..........
Burn 12's all day long, I'd say

Hmm firstly I'll still be in the EU after Brexit and didn't deal with the lads in Shropshire, my input was based on my use of the unit in question supplied by a dealer here. When I purchased it, it came with a 5 year warranty.
We had just finished a large factory install where I first came across the brand as it was being used by a small engineering contractor who had hired 10 units. All the other contractors on site were using Kemmpi machines.
All the welders that used them rated them highly. If the grey cells remember correctly it was €600.....................

 

[Welding Supplies Direct]

Have only about 6 sets left before the price goes up, so if you want one then get in touch !!

 

[Zebbedee]

Just ordered one looks a decent price thanks

 

[Zebbedee]

Arrived the other day looks smart although haven,t had time to use it yet

 

[Mur Huwcun]

We've one of these and a dual voltage model, lovely machines to weld with. Makes vertical welding look easy!!!

 

[fermerboy]

I bought one of these 180amp Jasic sets after reading about the offer on here.
Had another brand which went bang and was uneconomical to fix.

I had never heard of Jasic before, but after talking to the guys at Welding Supplies Direct felt reassured that they were a decent enough brand.
180amp, 5 year warranty, £165, Whats not to like?.

It only arrived on Monday so have only laid a couple of rods down to try it out.
First impression is big box for such a small welder!!!, all packed in a plastic case with foam inserts, which possibly seems on the flimsy side, It will be ok if its looked after I think.

Welder itself seems well made and solid with a good thick rubbery cable for the 240v in. The cables and earth clamp do seem a bit on the light side but are a decent length, I had homemade thick long leads on my last one so maybe its just my impression.

That said I had it well wound up to try it out and burnt two rods one after the other and there didn't appear to be a heat issue.
It does TIg as well and I'm sorely tempted to buy a TiG torch to see if I can learn myself Tig welding.

So far so good, and assuming it doesn't go bang I reckon its a good buy.

I had other stuff from Welding supplies too and the new Mig torch has transformed my Lincoln Mig welder, I didn't realise how knackered the old one was.

 

[Stock]

"I had homemade thick long leads on my last one so maybe its just my impression "


This I'm told is a no no one should keep the leads short 5m max as that what will damage the unit and use a longer extension lead........................

 

[fermerboy]

"I had homemade thick long leads on my last one so maybe its just my impression "


This I'm told is a no no one should keep the leads short 5m max as that what will damage the unit and use a longer extension lead........................

News to me!!!
The old one had really short leads which were a pain if you were making gates or similar. So i took the ones off my old oil cooled set.

Guess the electrode one is about 10ft, the earth a bit less.
This new welder set are not as long as that but much more usable, so not the same need to upgrade.

 

[Welding Supplies Direct]

Last few machines left !!! , we only have 3 machines in stock at the special farming forum price ........ once gone we cannot hold the price.

 

[joe soapy]

Last few machines left !!! , we only have 3 machines in stock at the special farming forum price ........ once gone we cannot hold the price.

Any left ?