Hi all we have a Jcb 520 2002 with a perkins 1004 - 4T engine in it.
It'll start and run fine until warm (around 5 minutes) then just cuts out dead, and won't turn over until its cooled off. When its tight it can be turned over with a bar on the flywheel and there is a definite tight spot when spinning it.
Good oil pressure and no strange noises/oil is clean so I'd imagine it isn't tight on the crank, has anyone seen this before, before we strip it down. Many thanks.
It'll start and run fine until warm (around 5 minutes) then just cuts out dead, and won't turn over until its cooled off. When its tight it can be turned over with a bar on the flywheel and there is a definite tight spot when spinning it.
Good oil pressure and no strange noises/oil is clean so I'd imagine it isn't tight on the crank, has anyone seen this before, before we strip it down. Many thanks.
