JCB 531/70 crab steer

[Hfd Cattle]

I use my JCB in crab steer all the time but recently the green lights on the dashboard have started flashing and it reverts to just front wheel steering . Any suggestions ?

 

[agcoparts]

Go to the steering valve block, which is located under the cab. To access it, raise the boom of the machine and remove the rubber protection on the floor of the machine. Check that all the valve wires are in place in perfect condition. Unplug and plug in the valves.Check the resistance of the solenoid valves to see if any are faulty.Check the steering sensors on the right side of the front and rear wheels.

 

[agcoparts]

Part-2

 

[Hfd Cattle]

Thankyou . Will get onto it later

 

[Hfd Cattle]

Go to the steering valve block, which is located under the cab. To access it, raise the boom of the machine and remove the rubber protection on the floor of the machine. Check that all the valve wires are in place in perfect condition. Unplug and plug in the valves.Check the resistance of the solenoid valves to see if any are faulty.Check the steering sensors on the right side of the front and rear wheels.

Sorted ......Thankyou

 

[Hfd Cattle]

P.s. I meant 4 wheel steer not crab steer ! But I presume you guessed it .