JCB 540/200 not lifting fully

[Sandman]

Hi

looking for a little help with a telehandler, our 540/200 won’t lift past 13 meters with the jack legs down.

The green indicator for the legs lights up on the dash but it seems like the the machine doesn’t realise they’re down, we did have a transmission speed sensor fault that’s been fixed.

At a bit of loss with this one, any help appreciated

 

[Sandman]

So….. turned out there was a wire shorting out coming from the pressure sensor for the jack legs, all the wires were a bit damaged where they feed into a hydraulic hose at the front of the machine.