JCB Dash Screen Delay/false readings

[rdr123]

Had it had a while back but usually turning it off and on again sorts it out. This time it'll be ok for a minute or 2 and then start playing up again everytime.

It's got the newer tablet style dash screen.

Makes it nearly impossible to navigate the menu's, gear showing isn't correct. Foward/backwards/neutral is wrong. Basically everything is slow to change.

Just wondering if anyone else has had a similar issue and what the fix was.

Machine is a 538-60, 2019, 4250 hrs.

Thanks.

 

[WillYorkshire]

Had it had a while back but usually turning it off and on again sorts it out. This time it'll be ok for a minute or 2 and then start playing up again everytime.

It's got the newer tablet style dash screen.

Makes it nearly impossible to navigate the menu's, gear showing isn't correct. Foward/backwards/neutral is wrong. Basically everything is slow to change.

Just wondering if anyone else has had a similar issue and what the fix was.

Machine is a 538-60, 2019, 4250 hrs.

Thanks.

Had the the turn off/on thing a few times but once reset been ok. Mine only done 750hrs though!

 

[rdr123]

Were you turning off the isolator to kill all the power? I've tried that a few times but may leave it off like that for a while and see.

 

[WillYorkshire]

Were you turning off the isolator to kill all the power? I've tried that a few times but may leave it off like that for a while and see.

No only the ignition key.

 

[rdr123]

No only the ignition key.

Tried all sorts and the dash was reading everything accurately last night but back to being delayed and random this morning

 

[rdr123]

If you pull the plug out the back of the screen to kill the power it resets and is fine then for 5/10 mins. Its as if it gets confused. Spoke to JCB dealer but they've never had this before so unsure if it is a connection issue or a problem with the screen.