Jcb sh1te parts

Just venting my anger again !
How the hell can Jcb claim to be a global force in manufacturing when their brake hoses cant even last a few months !
When the warranty is over on these set of hoses, im going elswhere.
:mad::mad::mad:
Feckin usless jcb Sh1t

:mad::mad::mad:
IMG_20190830_210636307.jpg
 

ACEngineering

Member
Location
Oxon
Just venting my anger again !
How the hell can Jcb claim to be a global force in manufacturing when their brake hoses cant even last a few months !
When the warranty is over on these set of hoses, im going elswhere.
:mad::mad::mad:
Feckin usless jcb Sh1t

:mad::mad::mad:View attachment 830557

If you could keep the spring on the ferrule it would stand half a chance! pipes probably too long IMO? maybe a short bit of adhesive heat shrink over the ferrule to help support the rubber hose so it bends further back would be better? couple of layers should do the trick?
 
If you could keep the spring on the ferrule it would stand half a chance! pipes probably too long IMO? maybe a short bit of adhesive heat shrink over the ferrule to help support the rubber hose so it bends further back would be better? couple of layers should do the trick?
Makes no difference, spring was on the rear one, still went. I would have to check, but i think the first blew at about 150 hrs after being fitted this second one is less than 40 hrs on top of that. Every one goes within an inch of the ferrule, poor quality hose not able to withstand the tight radius it goes through.
Im sure someone has told me to get some made up using gates megaflex pipe, and go down a size in pipe to 1/4 inch, that they would last much much longer, not sure on the braking performance though :scratchhead:
 

ACEngineering

Member
Location
Oxon
Makes no difference, spring was on the rear one, still went. I would have to check, but i think the first blew at about 150 hrs after being fitted this second one is less than 40 hrs on top of that. Every one goes within an inch of the ferrule, poor quality hose not able to withstand the tight radius it goes through.
Im sure someone has told me to get some made up using gates megaflex pipe, and go down a size in pipe to 1/4 inch, that they would last much much longer, not sure on the braking performance though :scratchhead:

1/4 inch will be fine but what you need is a hose tail support to take the flex away from the ferrule and make the hose bend further back and not as sharp. like these https://www.hoses.co.uk/hydraulics/...s/hose-protection/zinc-plated-antikink-spring
 

NI agri-food stakeholder groups discuss climate change bill with committee

  • 33
  • 0
Written by Richard Halleron from Agriland

The Livestock and Meat Commission (LMC) recently submitted oral evidence to members of the Stormont Agriculture, Environment and Rural Affairs (AERA) committee on the content and potential impact of the Northern Ireland Climate Change Bill (No.2).

This draft legislation was recently introduced to the Northern Ireland Assembly by the Department of Agriculture, Environment and Rural Affairs (DAERA) in conjunction with agriculture minister, Edwin Poots.

“We were accompanied by representatives from a wide range of food industry bodies, including the Northern Ireland Meat Exporters’ Association,the Ulster Farmers’ Union [UFU], Northern...
Top