jd 3200 problems

[nosmokenopoke]

Went to loadall today and it blew 30a ignition fuse when i went to start it, replaced it, and it wont turn over, bridge the starter and it wont start? You can hear the relay in fuse board clicking when you turn the key to start position, checked main power cable coming into cab under seat, its clean and good, good earth connection. Any ideas or pointers?

 

[L P]

Went to loadall today and it blew 30a ignition fuse when i went to start it, replaced it, and it wont turn over, bridge the starter and it wont start? You can hear the relay in fuse board clicking when you turn the key to start position, checked main power cable coming into cab under seat, its clean and good, good earth connection. Any ideas or pointers?

Starter winding maybe, won't start when bridged, cranking or just dead?

 

[nosmokenopoke]

Starter winding maybe, won't start when bridged, cranking or just dead?

its cranking full speed, just not firing

 

[L P]

its cranking full speed, just not firing

Got power to the stop solenoid on the pump? Sounds like you've had a short/break on ign live/exciter, been a long time since I had a 3200. From memory rats used to like getting up in under the side panel on cab by the boom. I had a few issues under there.

 

[FG.]

What year is your 3200?.
Do you have black ecu bolted to engine just under injection pump.

 

[czechmate]

What year is your 3200?.
Do you have black ecu bolted to engine just under injection pump.

do 3200 havé écu?
my 3420’s do but my 3400 doesn’t