John Deere 6215r

[vandalen]

Hello!

Traded a 2016 jd 6155r IVT for a brand new jd 6215r my19 IVT.
Wondering if it was possible to replace light knob to 4 steps and program it back to old behavior (off, park, hi/lo, worklights), and just toggle between presets 1 and 2 at commandarm?
Don't fancy the new 3 step knob, where you have to turn on worklights using the buttons in command arm.
Also wondered if it was possible to avoid setting up joystick at every start-up? Don't have the commandpro, and joystick is only used for loader.
Autotrack disables if tractor speeds below 0,5 kph and if in reverse, my old 6155r didn't do this. Any codes for deactivate this feature?

Regards from Norway

 

[nick...]

Your dealer should be your first port of call.get them to help you
Nick...

 

[vandalen]

Thanks. Will contact them.

 

[Brisel]

I've got a summer hire tractor that keeps asking for the joystick setup every time you start it up. I'd be grateful to know how to stop that happening.

 

[Will 1594]

I've got a summer hire tractor that keeps asking for the joystick setup every time you start it up. I'd be grateful to know how to stop that happening.

Rtfm???

 

[vandalen]

Update from my dealer:

 

[vandalen]

Rtfm???

Problem is that tractor wont let me save any configuration on joystick or itec. I can hit the save/load button down on right corner, but when new menu opens all i can do is load factory defaults. If i hit the +/save button down on left corner all the listings are greyed out...
Magnus

 

[Galcam]

I have command pro and joystick and it asks for setup every time. Annoying. Other thing I would love to do I’d disable the transmission sensitivity button on the command pro as it is in the wrong place and u touch it inadvertently. Makes Hedgecutting a PiA as the cutter arm is hammered like a bungee cord when you change direction.

 

[Brisel]

Rtfm???

I asked the dealer when he brought out a 750A drill for a demo on a newer 6215R. Apparently it's a safety feature that can't be disabled. If a user has set up a profile for the spools, joystick etc potentially a new operator could hop on and pull the wrong lever. Or something like that.

The hire tractor didn't come with a manual anyway

 

[vandalen]

Must be an option to turn it off using Service Advisor...

 

[rs1]

I've got a summer hire tractor that keeps asking for the joystick setup every time you start it up. I'd be grateful to know how to stop that happening.

I don’t think you can stop this annoying function, I was told it’s a new health and safety issue.

 

[Galcam]

I think the default tractor run page should tell you whose profile is active. I’m never sure unless I select custom etc.