John Deere 6600 Electrical Problem

Lars S

Member
Hi, am after some help with an electrical issue on a John Deere 6600. A few weeks ago, the radio stopped working. I have taken this out and bench tested it and it works perfect. I have checked the fuses which are all good and the wiring for continuity. However, i still seem to only get a reading of around 3v with voltmeter. The cab light next to it works fine. In addition, i have also had the front cab roof lights stop working. Again i have bench tested this and they work perfect, yet there doesn't seem to be any voltage at the connectors, and again the fuse is fine, as well as all the other lights function perfect.

Any advice much appreciated.
 

Tractortech

Member
Location
Cumbria
Now Then..
There is a connector in front of the rear cab pillar underneath the heater control console somewhere. Water can get in and corrode the pins.. It's the connection just above the number 2 in this parts page picture..
Screenshot_20201101-231609.png
 

Simon Chiles

DD Moderator
Moderator
Now Then..
There is a connector in front of the rear cab pillar underneath the heater control console somewhere. Water can get in and corrode the pins.. It's the connection just above the number 2 in this parts page picture..
Screenshot_20201101-231609.png

I think you’re right, however I would have described the connector as being under the console where the pto speed change lever is, or at least that’s where it was on my 6810. Symptoms were voltage to everything just not enough current to make the lights etc work.
 

Lars S

Member
Thanks for that I have had this connector apart and cleaned the pins etc they where all pretty good apart from a bit of debris. Unfortunately this hasn't made any difference. However I have found that when I remove the fuse for the front roof ligths, there is no voltage reading in fuse port when the light switch is on..I have checked the relays and they are all good.
 

flywheel

Member
Location
wae up north
Couple of years ago my 6400 radio would work intermittent...after taking it to local jd mechanic for sumthing else he found cable running up front right pillar ,a t piece corroded..sorted t piece problem sorted ..
 
Tags
deere

Will you help clear snow?

  • yes

    Votes: 72 32.1%
  • no

    Votes: 152 67.9%

The London Palladium event “BPR Seminar”

  • 15,919
  • 244
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top