John Deere 7810 cab lights

[seamusv]

Anyone ever fitted the extra 2 cab lights on the back of John Deere 7810 and is there wires there already or must they be wired from the existing 2 lights that are already there

 

[Courier]

Existing wiring will be plenty adequate if you make all 4 rear working lamps LED.

 

[Foxcover]

I’ve seen a couple of 7810’s with the double lights either side but they were smaller, square lights, not rectangular like normal.

 

[Flat 10]

6810 (with the smaller square lights) I fitted second pair and the wires were under the cab roof, easy to join up and all i needed was an additional rocker switch for the lights to pop in the control panel.

 

[L P]

Are you talking beltline or top lights?

 

[seamusv]

Top lights

 

[L P]

Are you talking beltline or top lights?

If it's top lights led ones are fine doubled up off existing wiring, not sure how the loom would take halogens as it is only a single loom, it would probably take it but will be on the wiring and fuse limit with 50w bulbs. I've double Leds on mine and for the current draw could do 4 each side if I really wanted, but that would be silly...