Kuhn 30.2 drop point

[DefenderDave]

What drop point have people used on diamond unprotected urea this spring- put some on a month ago which looked to be spreading consistent, but there is some ever so slight striping in the field starting to appear now towards the centre of the tramline.

Yes I know tray testing is the answer, and will get that done in due course but for now I just wondered what other people were using.

 

[JJT]

What drop point did you use? I used 7 but didn't tray test as it was the only day it wasn't raining or blowing a gale so had to get on. Won't have had time to show up any striping yet though, plus it was border line windy enough to be spreading urea but needs must.

Edit to say that was on 21m tramlines so don't know about 24m.

 

[DefenderDave]

What drop point did you use? I used 7 but didn't tray test as it was the only day it wasn't raining or blowing a gale so had to get on. Won't have had time to show up any striping yet though, plus it was border line windy enough to be spreading urea but needs must.

Edit to say that was on 21m tramlines so don't know about 24m.

7.5, was similar situation here in needing to get on.
found the urea is running a lot quicker than last years batch too

 

[JJT]

7.5, was similar situation here in needing to get on.
found the urea is running a lot quicker than last years batch too

What width are you spreading?

 

[Chae1]

What discs?

 

[DefenderDave]

24m and s4 discs

 

[Flat 10]

I use 7.5 and s4 with unprotected (last month) tray tested spot on

 

[Flat 10]

I use 7.5 and s4 with unprotected (last month) tray tested spot on

ADM . Don’t know how the inhibitor effects the ballistic properties

 

[Scragger]

5.5 throwing 24m on s4 discs, origin urea tray tested