Kuhn axis , changing top disc bearing

[idle git]

Okay , so I need to remove small shaft and pinion to get top bearing out ,
Don't want to make a complete Horlicks of it and messing it all up so who has done one

 

[idle git]

Just bumping this back onto page 1
Anyone?

 

[radu]

What model and year?

 

[idle git]

What model and year?

Axis 30.1. 2010

 

[radu]

Does it look like this?

The other pinion should be removed first.

 

[idle git]

Does it look like this?
View attachment 1010170

The other pinion should be removed first.

Yup that's the one

 

[idle git]

So circlip off and then pull out both bearings which will give you enough room to take out the big pinion out over the smaller pinion ???

 

[radu]

Yeah, that's how it looks like. Just be careful with the spacers, make sure you put them back in the right place.

 

[idle git]

Yeah, that's how it looks like. Just be careful with the spacers, make sure you put them back in the right place.

Thank you for your help radu

 

[e3120]

Thank you for your help radu

Did it work out like that? Got an 1131 that looks similar, but don't fancy making a hash on a long weekend. Slightly wobbly disc.

 

[idle git]

Blimey , ive been to bed since then , but yes the job went fairly easily ,,,,,, I think