Kverneland 7558 Bale wrapper

[Tha Ulsterscot]

Having a problem with my wrapper not completing full cycle. Sent the cicuit boards etc away and had them checked but no fault was found. Built it up today and still just the same, it will not return to fully down after tipping the wrapped bale, always stops half way down. All the parameters are set correctly. Has anyone else had this problem? or anyone suggest a fix ? TIA.

 

[wdah/him]

is there an oil restriction, our mchale would do some weird stuff if the return line had a dodgy/worn probe

 

[Tha Ulsterscot]

is there an oil restriction, our mchale would do some weird stuff if the return line had a dodgy/worn probe

No problems with oil flow, everything else works perfectly normal.

 

[Henarar]

will it go right down if you press the down button?

 

[Tha Ulsterscot]

Got the problem sorted., by moving the magnet further from the sensor. Now working fully automatic, one click per bale.