- Location
- Larne, Northern Ireland
What sorta money are these nordics?
NO AFAIK its all to do with the screening of the electronics that work the led chips & in CHINA where 90% of these things esp from ebay are from that just go's out the window. UTV Products have said there ones from CHINA are specced with the correct EMC spec to stop this interference. Its Standard Practice on all the Nordic Lights which if you have a read of the detailed specs it explains all about these issuesIs there a way to stop the interference? Put all leds on the 6506 here and didn't buy the cheap ones, changed the top line ones to led to. So they might be the problem but is there such a thing as a suppressor to fit somewhere?
What sorta money are these nordics?
Don't know not the man to ask, sure someone will know more on leccy, @MursalIs there a way to stop the interference? Put all leds on the 6506 here and didn't buy the cheap ones, changed the top line ones to led to. So they might be the problem but is there such a thing as a suppressor to fit somewhere?
Rather expensive then but guess you get what you pay forI bought some nordics from graham and they were about £100 a pair. They are really good and good quality. I swap them from combine to telehandler. I do plenty of buying cheap on ebay but in this instance these lights are worth it because you can tell they will last.
Rather expensive then but guess you get what you pay for
I don't really give a stuff about the radio, but given there is a far more critical steering receiver/controller sat in the roof, it's not worth the pain and aggravation of that playing up or being otherwise affected.Every time this subject comes up I struggle to see the benefit of going for expensive ones! I've lots on various vehicles all have been cheap eBay/Amazon ones have used the lower wattage but got a few 48w and are very good.
You're basically on a hiding to nowhere. Your best just fitting lights that don't spray RF everywhere. They do exist.Is there a way to stop the interference? Put all leds on the 6506 here and didn't buy the cheap ones, changed the top line ones to led to. So they might be the problem but is there such a thing as a suppressor to fit somewhere?
http://www.retrofitparts.co.uk/blog/led-halogen-hid-xenon-work-lights.htmlSo who is this Graham Smyth?
Website?
Is there a way to stop the interference? Put all leds on the 6506 here and didn't buy the cheap ones, changed the top line ones to led to. So they might be the problem but is there such a thing as a suppressor to fit somewhere?
£60 a pair i think last time i asked
So is a Nordic lumen better than a chinois lumen?
halogen bulbs are 55w each. Why buy smaller than the rated capacity of the wiring. Might as well have as much light as poss, the smaller leds aren't much cheaper?So if I was to get a cheep set of ebay or a decent set from Nordic is it best to avoid anything less than 40 odd wattage?