Chips
Member
- Location
- Shropshire
Left hand light cluster on my Ifor trailers had rotted out as damp got in , so went to get a replacement from local stores and saw an LED one for only £9.99 and thought ideal as it's sealed they wont get wet again which always seems to happen with the halogen ones . Anyway after wiring it up I have two problems , there is no side light , but that is due to no power coming to it and neither to the side markers on the trailer thus a separate issue . But the other problem is the indicator , it works fine when indicating ,working at correct brightness and speed of flash , but then when you stop indicating it keeps on flashing but duller and also much quicker , it even keeps doing this if indicating in the opposite direction and also when vehicle is switched off , in fact the only way to stop it is to unplug the trailer from the vehicle ! It all worked fine before and it's baffling me how it can get a flashing signal from the truck even when it's switched off and at a different speed , if you indicate right (the led is the left one) the right one goes at the right speed while the left one goes at a faster rate .
Any ideas what's going on or should I just go back and buy a standard halogen unit and put up with replacing it every few years
Any ideas what's going on or should I just go back and buy a standard halogen unit and put up with replacing it every few years